Aluminum melting furnace

It can meet the slab continuous casting and rolling, die-casting aluminum smelting, casting gravity concentration of water supply such continuous aluminum process requirement, to reduce oil consumption and reduce loss, improve product quality, reduce the labor intensity, improving labor conditions and improve production efficiency. Using the shaft furnace, the furnace gas furnace fractal structure, temperature uniformity, strong cycle without local overheating and improve product quality and prolong furnace life-span, at the same time, the burning flame from low burden. From the shaft furnace, the flame and feeding burden reverse flow, molten pool aluminous liquid fire after the heat for temperature (720 ° for 7.4 ° c), the shaft furnace bottom of shaft furnace, aluminum upper penetrates the flame temperature, heat exchanger in charge, the temperature is below 200 degrees from the roof exhaust smoke, thus reduce losses significantly, greatly improving the thermal efficiency. Characteristics: the shaft furnace preheating and impact, melting speed quick heating, low energy consumption, low loss, compact structure, small long campaign, simple operation. Specifications: the melting rate (tons of aluminum/hour) can be divided into: 0.1 T, 0.3 T, 0.5 T, 0.7 T, 1T 2T 3T, and eight kinds of specifications, 5-ton. Energy (1 million tons of aluminum) : daka / 0.1 T furnace than 85, 0.3 T -- more than 70 0.7 T furnace, 1T furnace than 55, More than 50 2T 3T furnace, - 5-ton furnace, burning more than 42:100% original when aluminum than 1.0%, When the massive re-blows 30% more than 1.5%; When the massive re-blows than 2.0% 50%, Applicable scope: aluminum pole, pure aluminum plate with the slab continuous casting and rolling, die-casting, low pressure casting, PuZhu etc, do not move the composition on melting. .